The Bell 429 GlobalRanger is a twin engine normal category eight seats helicopter with four main and four tail
rotor blades developed by Bell Helicopter Textron Canada, partnered with Korea Aerospace Industries and Mitsui
Bussan Aerospace of Japan. Development of the Bell 429 started primarily for the emergency medical services (EMS)
industry, which was looking for an updated Bell helicopter. Bell's original concept for the 429 was a stretched
model 427, the Bell 427s3i, but this did not provide what the EMS operators were looking for. Bell abandoned the
427 airframe and went to its MAPL concept airframe that was in conceptual development at the time. The 429 is
the first Bell helicopter produced with Modular Affordable Product Line (MAPL) components. MAPL is an approach
to helicopter production where multiple parts are designed to work on a variety of helicopter. The 429 has a carbon
composite fuselage and a 4-blade rotor system with soft-in-plane flex beams. The rotor blades are composite and
have swept tips for reduced noise. The tail rotor is made by stacking two, two-blade rotors set at uneven intervals
(to form an X) for reduced noise. Standard landing gear are skids. A retractable wheel landing gear for ground taxi
operations is optional (Bell 429WGL). The basic Model 429 includes a glass cockpit and is certified for single pilot
IFR. The combined cabin volume is 5.78 m³ with a passenger cabin and baggage area, with a flat floor for patient
loading. A set of rear clamshell doors under the tail boom is optional for easier patient loading in EMS operations.
The Bell 429 is powered by two 719 hp Pratt & Whitney Canada PW207D1 turboshafts with FADEC. The helicopter is
capable of operating with one engine inoperative. The prototype Model 429 (c/n 570001) was built at Bell's Mirabel,
Canada facility and made its first two flights as C-FCTA at the Mirabel plant in Quebec on 27 February 2007. In February
2008, Bell had three 429s in flight testing, including high altitude testing in Colorado and high temperature testing in
Arizona. On 19 June 2009, the Bell 429 received type certification from Transport Canada Civil Aviation (TCCA), followed
by the Federal Aviation Administration (FAA) on 7 July 2009. EASA certification was recieved on 23 September 2009. The
launch customer for the Bell 429 was Air Methods Corporation, the largest medevac provider in the United States. On 7 July 2009,
the first customer aircraft (s/n 57006) was handed over to Air Methods / Mercy One at Bell's facility in Mirabel, Quebec.
Today, over 275 Bell 429 GlobalRanger helicopters have been delivered worldwide.
In October 2013, Bell 429 s/n 57174 was flown first with test-registration C-GJAR. On 4 November 2013, Bell 429 was registered
C-GXYX with Bell Helicopter Textron Canada, Mirabel, Quebec. On 17 April 2014, registration C-GXYX was cancelled as exported to Switzerland.
On 22 April 2014, the Bell 429 was registered HB-ZAP in Switzerland with Héli-Alpes, Sion, as operator and ZAP Swiss, Sierre, as owner.
The 2013-built helicopter is equipped for a nose mount camera. On 9 October 2016, Bell 429 HB-ZAP was seen with HELI ALPS titles at
Heliport Amsterdam, when on its way to Helitech International 2016 in the RAI in Amsterdam.
Luchtvaart déjà vu
