The Aerospool WT-9 Dynamic is a two-seat high-performance ultralight
airplane designed by Wala Tadeas. Development of the Aerospool WT-9
Dynamic started in 1998. The prototype of the WT9 Dynamic, the D-MXWT
flew first in 2000. For the construction of this aeroplane has been made
optimal use of advanced materials as polyurethane and carbon composites.
The fuselage of the plane consists of composites sandwich shells where
the main construction element is carbon fibre. The ergonomic designed
canopy frame is made out of carbon composite, for the canopy an acrylic
glass design made by Mecaplex is used. As power plant the 80hp Rotax 912
UL and the 100 hp Rotax 912S is available. Next to the Dynamic "Club"
with fixed landing gear, the Dynamic "Speed" is available with an
electrohydraulic retractable landing gear. The empty weight of the basic
aircraft starts as low as 265kg. The Dynamic "Speed S" with the Rotax
912ULS engine has a cruise speed of 240 km/h. In 2001, Aerospool s.r.o.
begun with the production of the Dynamic in their modern factory on the
airport of Prievidza in Slovakia. Apart from the ready-to-fly aircraft
the Dynamic is available as a basic kit and it is also possible to order
a partially assembled kit. To improve the flying qualities a new wing with a
winglet was developed. On 31 August 2017, the EASA certified the Aerospool WT-9 Dynamic LSA version.
A further development of the WT-9 Dynamic was the Dynamic OK Edition a wholly
from bottom up re-engineered high-wing aircraft. Aerospool has built over 750 WT-9 Dynamic aircraft.
The ICAO Aircraft Type Designator for the Aerospool WT-9 Dynamic is WT9
On 16 December 2002, the 2002 built Aerospool WT-9 Dynamic s/n DY022/2002 was registered PH-3S2 in the Netherlands
with M.R. van Essen, Appingedam. The airframe is fitted with a Rotax 912ULS engine. On 13 February 2014,
registration PH-3S2 was cancelled as exported to Germany and registered D-MALX. On 6 March 2011, Aerospool WT-9 Dynamic
PH-3S2 was seen at the MLA-aerodrome Stadskanaal in Vledderveen (EHST).